Home / Pillow Block Bearing, 7 in Bore, Cast Iron
Pillow Block Bearing, 7 in Bore, Cast Iron
Pillow Block Bearing, 7 in Bore, Cast Iron
Pillow Block Bearing, 7 in Bore, Cast Iron

Pillow Block Bearing, 7 in Bore, Cast Iron

  • Moline Bearing
  • Pillow Block Bearing, Base Height 3.69 in, Base Width 7.13 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Tapered Roller, Bore Diameter 7 in, Bore Type Cylindrical, Center Height 7.5 in, Expansion Type Expansion, Housing Material Cast Iron, Included Bearing Timken Type E Tapered Roller, Lubricant Material Lithium Complex Grease, Maximum Speed 750 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Mount Hole Center-to-Center Length 22.25 in

    graingerSKU: , mscSKU: , zoro_no: G1160779, mongo_id: 65bbe8b222d7a989a990c539

Web Price
$11,248.74 / each
Qty

Product Details

Aggregate, Conveying, Cranes, Forestry, Mining, Oil, Gas, Power Generation, Screening
3.69 in
7.13 in
Cast Iron
Alloy Steel
Tapered Roller
Timken Lithium Complex Grease
52100
22 1/4 in
1 in
7 in
7 in
Cylindrical
7.5 in
United States
10 1/2 in
26 in
7 1/8 in
22 1/4 in
1 in
2 1/8 in
3 11/16 in
15 in
10 1/2 in
7 1/2 in
574,000 lbf
574,000 lb
Expansion
Assembled, Adjusted and Pre-Lubricated in Advance for Immediate Use, Built with Timken (TM) Enhanced Dee Tapered Roller Bearings with the Highest Industry Load Ratings, Double-Extended Inner Race, Case Hardened Rollers and Races, Close Fit Oversized Collars Act as Flingers for Additional Protection in Dusty or Damp Environments, Dimensionally Interchangeable with Comparable Type E Units, Moline Split E1000, Moline ME2000 and ME3000, Extended Inner Race has Two Locking Collars with 65 Degrees Set Screw Spacing, Misalignment = .010 in Per Foot of Shaft, Standard V-Guard(TM) Nitrile and Teflon Contact Seal or Balanced Labyrinth Seal, Timken(TM) Lithium Complex Grease Operating Temperature is up to 250 Degrees , High Temperature Grease is Available up to 350 Degrees
Cast Iron
Timken Type E Tapered Roller
Timken Type E Tapered Roller Bearing
Radial, Thrust
Lithium Complex Grease
750 RPM
750 RPM
250 Degrees F
-40 Degrees F
22.25 in
4 5/8 in
2 1/8 in
Bolt-Through
1 in
7 1/2 in
4
4
15 in
26 in
10.5 in
1
Contact
Set Screws
574,000 lb
574,000 lbf
Inch
-40 Degrees to 250 Degrees F

Viewed together

3M, Abrasive Belt, 37" Wide X 75" Oal, 220 Grit, Aluminum Oxide
$98.26 / each
Web price
Qty
Benchstand Belt, Coated, 6 in W, 48 in L, 100 Grit, Fine, Ceramic, Predator, Yellow
$24.74 / each
Web price
Qty
Benchstand Belt, Coated, 6 in W, 48 in L, 60 Grit, Medium, Ceramic, Predator, Yellow
$28.24 / each
Web price
Qty
Benchstand Belt, Coated, 6 in W, 48 in L, 50 Grit, Coarse, Ceramic, Predator, Yellow
$30.36 / each
Web price
Qty
Minimum order: 10
Benchstand Belt, Coated, 6 in W, 48 in L, 36 Grit, Extra Coarse, Ceramic, Predator, Yellow
$43.99 / each
Web price
Qty